Search

protection combined or only with fire protection ( Fire protection doors Jansen Economy 60 ). Also possible without smoke protection ( Jansen Economy 60 door ). Test certificate Smoke control in accordance with [...] Jansen Economy smoke protection systems allow a rational production of flush smoke control doors according to DIN 18095. The profiles of the 60 depth are characterised by the narrow face widths. Many different

Jansen steel profiles create large-area and torsion-resistant door systems with slender frames.The profile and seal ranges are suitable for manual and automatic door systems. The Jansen folding and door

structural values and achieves top values in system tests (air/water/wind/mechanics). With Janisol HI, Jansen sets new benchmarks in terms of contemporary architecture combined with excellent thermal insulation

Jansen has put the advantages of ceramic to good use. The result is fire protection doors that optimally combine strength with the highest fire protection characteristics. Thanks to the innovative fire

protection combined or only with fire protection ( Fire protection doors Jansen Economy 50 ). Also possible without smoke protection ( Jansen Economy 50 door ). Test certificates Smoke control in accordance with [...] Jansen Economy smoke control systems are particularly suitable for the fabrication of large and heavy smoke control doors. Even though the doors may exceed standard dimensions, the face widths are extremely

door Also available with fire protection ( Fire protection doors Jansen-Economy 60 ) or smoke protection ( Smoke control doors Jansen-Economy 60 RS ). Test certificates CE marking in accordance with product [...] Thanks to its greater installation depth and wall thickness, the Jansen-Economy 60 system is particularly suitable for large, heavy duty single and double doors and for applications requiring higher levels

tops) Also available with fire protection ( Fire protection doors Jansen Economy 50 ) or smoke protection ( Smoke control doors Jansen Economy 50 RS ). Test certificates CCE marking in accordance with [...] Jansen-Economy 50 is the profile system for flush door constructions without thermal insulation. The simple profile shapes ease the task of assembly. The wide range offers room for creative and cost-effective

With an installation depth of only 50 mm, the Jansen Economy 50 profile system is suitable for slender, elegant window designs without thermal insulation. Tested systemised fittings are available for all

established steel profile series up to RC3 with the simultaneous introduction of an anti-panic function, Jansen is presenting the European market with CE-certified anti-panic doors that also meet all of the r

hinge bearings, the Jansen Economy 60 anti-finger-trap doors are particularly suitable for buildings with heavy public use such as shopping centres, schools or hospitals. The Jansen Economy anti-finger-trap [...] Efficient assembly and installation of fittings Straightforward and cost-effective thanks to the usage of Jansen-Economy 60 profiles from the standard range

shopping centres, railway stations and airports. The anti-finger-trap door looks identical to other Jansen anti-finger-trap doors without fire protection rating. In addition, the door can be fitted with many

With the well-known Jansen Economy profiles class E30/EW30/E60/EW60 fire doors and fixed lights up to class E90 can be fitted. The appearance of the Jansen Economy doors is identical with that of the Janisol [...] combined or only with smoke protection ( Smoke control doors Jansen Economy 60 RS ). Also possible without fire protection, see link for details ( Jansen Economy 60 door ). Test certificates Fire resistance class [...] 2 and Janisol C4 fire safety systems. The profiles of the 60 depth have very narrow face widths. Jansen Economy profiles allow smoke protection system components with cost-effective flush smoke protection

using VISS SG and the structural glazing method, it is very easy to construct glazed roofs. The Jansen VISS SG system can be readily combined with all VISS profiles with face widths of 50 and 60 mm, as

Welded steel constructions come into their own in roof glazing. With VISS Basic, Jansen offers cost-effective and aesthetically outstanding system solutions for support-free roof constructions. The free

exchangers; these do not have even half the surface area of JANSEN powerwave corrugated pipes. With a capacity per metre of pipe of 2.27 litres, the JANSEN powerwave corrugated pipe also has a very large energy [...] Flexible, safe and powerful The JANSEN powerwave collect trench heat exchanger, ideal for heating and hot water production, offers the advantage of low investment costs and less space compared to a horizontal [...] ensures constant regeneration and no geological risk during installation. The high efficiency of the JANSEN powerwave corrugated pipe represents a further crucial factor for optimal performance. The energy

With the VISS system, Jansen offers a highly thermally insulated facade construction with a Passivhaus certificate for any application both in new buildings and refurbishments. The components from the

With VISS Basic, Jansen offers cost-effective and aesthetic system solutions for the support-free construction of facades. The design of the system is based on the tried-and-tested VISS system. This makes

Innovative technology for maximum performance The coaxial heat loop JANSEN powerwave coax with corrugated pipe technology offers maximum efficiency. Its outer corrugated pipe makes possible better energy [...] energy absorption from the ground as well as reliable and quick installation. JANSEN powerwave coax ground source heat loops are manufactured from notch-resistant, high-quality PE 100 RC material of the latest [...] latest generation. Thanks to modern production technologies and highly-qualified employees, Jansen as a Swiss manufacture guarantees a first-class, durable product certified according to current standards

mechanics, Jansen has increased the efficiency of ground source heat systems to a new level. In co-operation with the Institute for Energy Technology at the University of Rapperswil "IET/HSR", Jansen has developed [...] is expensive; with the JANSEN shark ground source heat systems, filling is also around 4 % less expensive than with conventional smooth pipes. Ground source heat loops With JANSEN shark technology, ground [...] more than 60 years of experience in the development and manufacture of innovative plastic systems, Jansen, as a Swiss industrial business, stands for both the highest quality and precision and for pioneering

Length Filling volume per m heat loop JANSEN vertex Single-U 50 x 4.6 mm; PN 16 250 to 300 m 5.231 l/m JANSEN vertex Doppel-U 50 x 5.6 mm; PN 20 250 to 350 m 4.73 l/m JANSEN vertex Doppel-U 50 x 7.9 mm PN 30 [...] ground. The JANSEN vertex ground source heat loop is particularly suitable for hot water preparation and for heating and cooling buildings. With the vertex special ground source heat loop, Jansen offers a [...] deep bores, larger or special pipe dimensions, and even custom fabrications. In particular, the JANSEN vertex with a diameter or 50 mm impresses with its unique hydraulics, high resistance to pressure

Maximum performance: in comparison to conventional ground source heat loops, the JANSEN powerwave single-u has measurably higher thermal transfer performance and a larger energy storage volume. The structured [...] the system over its service life. Certification SKZ-HR 3.44, SKZ A698 Material PE 100 RC Pipe type JANSEN powerwave Wellrohr 63 x 2.9 mm Coefficient of thermal transmittance k2, corrugated pipe ~30 W/mK

individual chemical resistance of PEHD can be found in the Jansen datasheet "Chemical resistance of Jansen tubes". Bridge drainage The JANSEN nero rainwater drainage system can be used in the drainage [...] of the JANSEN nero drainage pipe system for buried wastewater pipes, such as dimensions, wall thicknesses and annular rigidity, are defined in SN EN 12666 definiert. Rainwater pipes The JANSEN nero wastewater [...] wastewater The JANSEN nero rainwater drainage system is hot water resistant and fulfils the requirements of DIN EN 12056 and DIN 1986-100 (95° C short-time load). Industrial wastewater The JANSEN nero rainwater

JANSEN easy manifold chambers offer the optimal solution in every situation. They impress with low weight and straightforward installation. All connection lines are leak-proof welded to the chamber wall [...] manifold system is pressure tested in the factory. You will find further technical details in the JANSEN easy product information. Special versions are available on request. Materials PE, stainless steel

Sewer camera inspections produce excellent results due to the light colour of the inner coating The JANSEN bianco sewer and perforated pipes are suitable for a wide range of applications. Municipal authorities

By combining double pipe systems with JANSEN system manholes it is possible to install wastewater lines in water quality management areas. Double pipe lines can be installed by inserting a welded PE sewer

and outer layer up to 16 bar Jansen Wavin TS DOQ ® in straight lengths of 12 m, smooth ended Nominal pressure Series / SDR Dimensions dn PN 16 S5 / SDR 11 32 to 400 mm Jansen Wavin TS DOQ ® in coils of 100 [...] The co-extruded three-layer pipe provides the best possible resistance to scoring and point loads. Jansen Wavin TS DOQ ® consists of heavy-duty, crack-resistant Finathen N 8000, a material of the PE 100

The co-extruded double-layer pipe with protective properties consists of tough PE 100 RC.The external layer is 10% of the standard wall thickness and is coloured according to the fluid transported. Ma

advantages: notches and scores in the pipe cannot cause any damage to the pipe line in the long term. JANSEN PE 100 RC is made of modified PE and has greater resistance to slow crack propagation and stress [...] above, these pipe systems remain flexible enough to accommodate movement during installation. The JANSEN PE 100 RC coiled pressure pipes are approved by the SVGW (No. K 111). Materials polyethylene PE 100 [...] with yellow stripes up to 5 bar Wastewater and industrial pipes, black without stripes up to 40 bar JANSEN pressure pipes of PE 100 RC in lengths of 10 m, smooth ends Nominal pressure Series / SDR Dimensions

The new generation of ground source heat loops As standard, JANSEN geotwin ground source heat loops are manufactured from notch-resistant, high-quality PE 100 RC material of the latest generation with [...] traceability from the raw material used to the site. The unique, patented double-pipe winding gives the JANSEN geotwin its name and offers various advantages such as: Quick, straightforward reel mounting Even

covered using deep ground source heat loops even if space is limited. Discover our JANSEN hicon press connector for the JANSEN hipress probe. Pressure requirements up to PN 35 Diffusion-resistant Familiar handling [...] The most powerful ground source heat loop in the world JANSEN hipress reaches new dimensions in geothermal energy. As the most powerful ground source heat loop in the world, it has the lowest hydraulic [...] resistance in relation to the installation diameter required. The Earth is an immense energy store. Jansen is an expert in making this store accessible for heating or cooling. Because the Earth's temperature

Thanks to its low weight, the JANSEN PE system shaft for welded systems can be quickly and easily installed by hand, even in difficult terrain The modular system also ensures rapid construction progress

processes without consistent digital support, the six manufacturing companies Dormakaba, Hilti, Hörmann, Jansen, Schüco and Xella have founded the "productsforbim" manufacturer initiative. The founding companies'

PULSE. IMPULSE. INSPIRATION.

of just 150 millimetres and a slim face width of 60 millimetres. With VISS SG , the Swiss company Jansen AG offers an architecturally high-quality solution for the construction of aesthetically pleasing

Muzzolini’. The result is an unpretentious building with a surrounding facade made of highly static Jansen VISS 60 profiles which reaches seven to seven-and-a-half metres, and makes a clear and distinctive [...] distinctive statement in this mixed urban area. The architect consciously opted for the highly static Jansen VISS 60 profile system: “We were looking for an elegant solution, and the metalworker drew our attention [...] loads, we were won over straight away by the surprisingly narrow face width.” With the highly static Jansen VISS 60 profiles, it was possible to continue the supporting structure of the shell, which was kept

designers from the initial phases of their concept and scheme design. We offer BIM models of different Jansen steel systems via our BIMobject Clou d for individual download.

About Jansen BIM Cloud Enriched with geometric characteristics and relevant product data, the use of BIM models makes it possible to illustrate real buildings in virtual 3D presentation at an early stage

building structure was thermally insulated and the glazing was replaced with Janisol Arte and the Jansen VISS HI facade. Read more in the online magazine SCALE SUD Architectes , Lyon/FR ALEP Architectes

restored for this purpose. To do this, Jansen bent the more than nine-metre-high windows made of Janisol Arte profiles using a template from the metalworker Jansen. Bez + Kock, Stuttgart/DE DE-Bochum

AWS 90.SI aluminium windows and the Jansen VISS steel facade with structural glazing were used for the facade. In the interior, individual FWS 50 glass facades and Jansen Janisol 60 steel doors were also

Kanton Appenzell Innerrhoden Hersche Ingenieure AG , Appenzell/CH Koch AG , Appenzell/CH CH-Appenzell

and EXR 3 explosion resistance, all packaged neatly into one profile: the Economy 60 system from Jansen. Samyn and Partner , Brussels/BE Studio Valle Progettazioni , Rome/IT Buro Happold , Bath/UK Lootens

Kohler und Studiger AG, Dietikon Kohler und Studiger AG, DietikonOberriet

Davide Macullo Architects , Lugano/CH Wehrli Metallbau AG , Wil /CH Aepli Metallbau AG , Gossau/CH K + K Fassaden AG , St. Gallen Dileis, St. Gallen/CH Fiorio Fassadentechnik GmbH , Zuzwil/CH 2011 CH-

CONNEX cube window system. The saving in production time is another big advantage. Similarly, the Jansen range includes a 3D steel screw-on hinge: specially developed for outward opening door systems, the [...] Schüco systems Visually identical to CONNEX cube windows The door is your building's business card Jansen wood-aluminium windows ensure optimal light transmission Opening types: Side-hung, tilt-turn, bottom-hung

that must be protected against hot or cold temperatures. Both the fluid pipe and conduit consist of JANSEN bianco drainage pipes. The gap between inner and outer pipe is filled with FCKW-free polyurethane

connecting click-on sockets JANSEN PE conduits in 6 m lengths, with click-on sockets Colour Diameter conduit dn Diameter fluid pipe dn yellow or blue 90 to 200 mm 63 to 160 mm JANSEN PE conduits in coils, with [...] embedded in various embedding materials; also protects against damage during subsequent excavation. When JANSEN conduits are specified it is possible to use economical pipe material. Another advantage is the colour

Steel systems for windows, doors and facades

selection ............................................................................... 23 5.10 Jansen automatic folding/sliding door ................................................................. [...] to offer S-CAD licences as a floating network solution. We hope you continue to enjoy using our Jansen software. Documentation Version 2024 R1 English May 2024 Page 7 of 75 JANIsoft 2024 R1 [...] Version 2024 R1 English May 2024 Page 24 of 75 JANIsoft 2024 R1 Page 24 of 75 5.10 Jansen automatic folding/sliding door The calculation of automatic folding/sliding doors is included.

Design für den gehobenen Innenausbau