PE drainage pipe system JANSEN nero
JANSEN nero is approved as a universal system for the draining of wastewater within buildings according to SN EN 1519 and for buried pipes according to SN EN 12666.
The range comprises tubes and fittings made from PEHD in dimensions ranging from dn 40 to 315 mm.
Material
JANSEN nero drainage pipes and fittings are made from PEHD polyethylene and come in one black colour.
Classification
Material, dimensions, approval, manufacturing plant, week.year, Nat.Charge Nr., Arb. Nr.
Example: Jansen nero under licence of Wavin PE80, ø 125 x 4.9, SSIV/VSA, JO 14.13 081547, 1983
Physical properties
| Melt index | 0,3 - 0,89 g/10 min |
| Coefficient of linear expansion | 0,2 mm/m - K |
| UV-resistant thanks to soot share | from 2 - 2,5 % |
| Fire behaviour | Fire code SI VKF Iv/3 B2 |
Ground pipes
The applications of the JANSEN nero drainage pipe system for buried wastewater pipes, such as dimensions, wall thicknesses and annular rigidity, are defined in SN EN 12666
definiert.
Rainwater pipes
The JANSEN nero wastewater pipe system is suitable for the draining of rainwater. Siphonic drainage and rainwater drainage in a vacuum process can be realised with the PE wastewater pipe system.
Domestic wastewater
The JANSEN nero rainwater drainage system is hot water resistant and fulfils the requirements of DIN EN 12056 and DIN 1986-100 (95° C short-time load).
Industrial wastewater
The JANSEN nero rainwater drainage system is resistant against aggressive chemicals. The individual chemical resistance of PEHD can be found in the Jansen datasheet "Chemical resistance of Jansen tubes".
Bridge drainage
The JANSEN nero rainwater drainage system can be used in the drainage of bridges in road building. Tubes and fittings have a variety of resistances against further environmental influences (e.g. road salt).
