PSU 450 H steel saw

The PSU steel saw is an extremely robust machine. The guideways are designed to resist many times their actual load. The gear unit is manufactured from high-strength, surface-treated materials. Consequently, the saw blade replacement intervals are very long and the cuts require no reworking during further processing. The specially shaped clamping jaws hold the steel profiles without deforming them.

  • 1 saw blade Ø 450 mm
  • Swivel range 30° − 45° − 90° − -45° − 30°
  • Index pins at − 45° − 90° − -45°
  • Stationary sub-frame with swarf tray
  • Vertical hydraulic clamping device, including clamping piece
  • Coolant system (continuous-flow cooling)
  • Saw blade speed 12 / 24 / 48 / 96 rpm
  • Gears with rotation compensation
  • Pole-changing three-phase motor
  • Stepless saw blade cutting speed regulation, hydraulically controlled feed
  • Saw blade feed regulation 0-14 mm/s
  • Return speed 75 mm/s
  • Electrically controlled upper and lower lift limit
  • Hydraulic system
  • Paint finish: RAL 9006 (white aluminium), RAL 7016 (anthracite grey)

Height 2500 mm
Depth 1200 mm
Width 1500 mm
Weight 1250 kg
Speed 12 / 24 / 48 / 96 rpm
Output 3.0 / 3.6 kW
Voltage 400 volt
Frequency 50 Hz
Current 16 A
Operation pressure 6 - 8 bar
Compressed air consumption -
PSU 450 H steel saw