1. Home
  2. Building Systems
  3. Services
  4. Machines and fabrication aids
  5. Machine range
  6. Detail
Back

CNC-AF 450

A powerful 7.5 kW motor and an automatic tool changer with 12 places allow a high level of flexibility when working.

  • 3-sided machining of aluminium and steel profiles
  • Steel machining (S235 up to approx. 5 mm wall thickness, without pre-head processing)
  • 7.5 kW spindle / max. 24,000 rpm / compressed air cooled
  • Network card
  • Stiff machine bed for high loadings
  • The main axes slide on precision linear guideways
  • The profile is firmly held by pneumatic clamps
  • Absolute displacement-measuring system for the main axes
  • 4 folding fixed stops for accurately defining the zero point
  • Automatic tool changer with 12 places
  • 3 operating modes:
    • Single bar with extra length profile bar processing over the total processing length of 7200 mm and longer.
    • Multi-bar with different contours. Several profile bars (up to 4 bars) with different contours and lengths
    • Alternating operation with ASP system 2 zones, each with a profiled bar
  • Automatic clamp positioning (ASP)
  • The forward position of the locating edge for the profiles makes it easier to insert and remove them
  • Profile supports with quick-release system
  • The tools are cooled by a minimum pulse spray device
  • The axes are automatically lubricated by a centralised system
  • Swarf drawers
  • Paint finish: RAL 9006 (white aluminium), RAL 7016 (anthracite grey)

Operation and control

  • Easy-to-use control terminal with 19“ TFT colour display
  • SchüCam used for machine control
  • Windows® is the common operating system for SchüCam and JANIsoft
  • The machine is supplied with the software installed
  • Processing data for the AF 450 can be generated directly in the design and calculations software
  • SchüCam can be used on an office PC
  • The SchüCam software is operated on the machine in the same way as on the office PC
  • SchüCam with visualisation of the profiles, tools and the processing to assist with monitoring on both an office PC and on the machine
  • Quick and easy transfer of machining data by USB or over the network
  • Simple, menu-guided modification of processing macros without NC programming knowledge
  • In-house programming without the need for NC / CNC knowledge
  • Remote maintenance software

Height 2500 mm
Depth 3190 mm
Width 9660 mm
Weigth 5800 kg
Speed 24,000 rpm
Output 7.5 kW
Voltage 400 volt
Frequency 50 Hz
Current 32 A
Operating pressure 8 bar
Compressed air consumption 170 Nl / cycle
CNC-AF 450

Downloads

Contact

Do you have any questions about our services? Would you like some advice? Our advisers are always pleased to help you.

Contact partner