The new JANIsoft Update 2019 R3 is available!


The new JANIsoft software update is now ready for installation. The new release "JANIsoft 2019 R3" is available as 32-bit or 64-bit version. In this update we introduce 4 highlights, which you can also watch in detail in the video.


Janisol Arte 66

In the Janisol Arte system, it is now possible to change the profile depth from 60mm to 66mm. This allows you to create both side-hung windows and turn/tilt windows. The selection for the 66mm version can be selected in the standard Janisol Arte system via a switch. From this version onwards the glazing settings can be defined per field. New are also the wide profiles selectable.

Jansen Art’15

From this version on, the Art'15 system can be used for outward opening doors. You can choose between three different versions: "flush-fitted, open-top (only 1 leaf with or without fixed panel) and overturning".
Jansen AG already provided various templates which can be downloaded and used.

STEP Export

Since 3D programs are widely used nowadays, elements can now be exported as STEP files and loaded into a 3D CAD program that can read the STEP format. This option must also be programmed on the USB license connector and is therefore not available as standard.

Janisol HI optimisation

For the Janisol HI system, there are various optimizations starting from this version. New door seals can be identified, the new flat door sill combined with the automatic floor seal can now be selected and much more.